NiteSafe Duo + LED Dual Motion Sensor Night Light With Torch & Power Failure Light

• Description
• Product Details
• Download

The Duo + is a dual motion sensor and dusk to dawn nightlight allowing you to choose the very best setting for your chosen location.

• The motion sensor activates the nightlight for about 20 seconds when movement is detected during hours of darkness.

  The Dusk to Dawn nightlight is a softer light but when movement is detected the light brightens for about 20 seconds and then reverts back to the regular Dusk to Dawn light.

  The bright 8 LED torch sits in a charging cradle plugged into the wall and is kept permanently charged by induction charging. If the power fails, or you take the torch from its charging cradle it switches on automatically.

• Please note the nightlight and/or motion sensor features can not be turned off with this model. If you are looking for a power failure only light we recommend our Xtralite NiteSafe Maxi model as this torch can be switched to 'off'  on the unit itself but will still light up in the event of a power cut if it is plugged in with the wall socket switched on. For more information please see our FAQs page.

• 
  

• • Part Of The NiteSafe Range
  • Comes With Induction Charging Base That Plugs In To A Wall Socket
  • When First Plugged In The Model Will Be In Motion Sensor Mode - In This Mode The Front LEDs Light Up In Darkness When Motion Is Detected
  • Press The Button On The Back Of The Model To Switch To Dual Night Light With Motion Sensor Mode
  • In Dual Mode The Front LEDs Will Be Constantly On In Darkness & Get Brighter If Motion Is Detected
  • Night Light - 0.4 Lumens
  • Motion Sensor Light - 8 Lumens
  • Automatic Power Failure Detection - Should The Power Fail The Top LEDs Will Automatically Activate
  • The Model Will Stay Activated For Up To 10 Hours In Power Failure Mode Or When Removed From The Cradle
  • Remove The Model From The Base To Use As A Torch
  • Once Removed From The Base The Top LEDs Will Be On A Low Light LED Mode
  • Press The Button On The Back To Activate The Front LEDs In Torch Mode
  • Press The Button On The Back Again To Activate The SOS Emergency Flashing Mode
  • Press The Button A Final Time To Turn The Torch Off
  • Sensor Delay Time 20 +/- 5s
  • Sensor Distance 3-4 meters
    
  • Allow The Model To Charge For 24 Hours Before First Use
  • The Night Light &/Or Motion Sensor Can Not Be Turned Off
• Download Manual